| 24 / 230 | 48 / 230 | 60 / 230 | 110 ** / 230 | 220***/ 230 |
| GENERAL |
| EMC (immunity) | EN 61000-4-2 / EN 61000-4-3 / EN 61000-4-4 / EN 61000-4-5 / EN
61000-4-6 / EN 61000-4-8 |
| EMC (emission) (class) | EN 55022 (A) | EN 55022 (B) | EN 55022 (A) | EN 55022 (B) |
| Safety | EN62040-1 |
| Cooling / Isolation | Forced / Doubled |
| MTBF | 240 000 hrs (MIL-217-F) |
| Efficiency (Typical): Enhanced power conversion / on line | > 95.5% / > 89.5% | 96% / 91% | 96.5% / 92.5% |
| Dielectric strength DC/AC | 4300 Vdc |
| True Redundant Systems – compliant | 3 disconnection levels on AC out and DC in power ports 4 disconnection levels on AC in port |
| RoHS | Compliant |
| Vibration | GR63 office vibration 0 to 100 hz-0.1 g / transport vibration 5-100
Hz 0.5 g 100 to 500 hz-1.5 g / Drop test |
| Operating conditions | Designed for installation in an IP20 or IP21 environment. When installed in a dusty or humid environment, appropriate
measures (air filtering, …) must be taken. |
| Altitude above sea without de-rating | < 1500 m / derating > 1500 m – 0.8 % per 100 m |
| Ambient / storage temperature / relative humidity | -20 to 50 ° C / -40 to 70 ° C / 95 %, non-condensing |
| Material (casing) | Coated steel-ALU ZINC | |
| AC OUTPUT POWER |
| Nominal Output power (VA) / (W) | 1500 / 1200 | 2500 / 2000 |
| Short time overload capacity | 150 % (15 seconds) 110 % permanent within T° range |
| Admissible load power factor | Full power rating from 0 inductive to 0 capacitive |
| Internal temperature management and switch off | Yes |
| DC INPUT SPECIFICATIONS |
| Nominal voltage (DC) | 24 V | 48 V | 60 V | 110 V | 220 V |
| Voltage range (DC) | 19 – 35 V | 40 - 60 V | 48 - 72 V | 90 - 160 V | 170 - 300 V |
| Nominal current | 56 A (at 24 Vdc and 1200 W output) | 46 A (at 48 Vdc and 2000 W output) | 35 A (at 60 Vdc and 2000 W output | 19 A (at 110 Vdc and 2000 W output) | 9.8 A (at 220 Vdc and 2000 W output |
| Maximum input current (for 15 second) / voltage ripple | 84 A / < 100 mV rms | 84 A / < 2 mV Psopho | 52 A < 100 mV rms | 29 A / < 200 mV rms | 14.9 A / < 200 mV rms |
| Input voltage boundaries | User selectable with T2S interface |
AC INPUT SPECIFICATIONS AC input available only with EPC modules, REG modules do not have
any ACin |
| Nominal voltage (AC) | 220/230/240 V 1P or 3P (Min 3 shelves for 3P) |
| Voltage range (AC) | 150-265 V |
Brownout | 150 to 185 V linear derating 150 VA/120 Watts per 10 Vac |
1200 VA / 960 W @ 150 Vac | 2000 VA/1600 W @ 150 Vac |
| Conformity range before transfer to DC | Adjustable |
| Power factor | > 99% |
| Frequency range (selectable) / synchronization range | 50 – 60 Hz / range 47 – 53 Hz / 57 – 63 Hz |
| AC OUTPUT SPECIFICATIONS |
| Nominal voltage (AC*) | 220/230/240 V |
| Frequency / frequency accuracy | 50 - 60 Hz / 0.03 % |
| Total harmonic distortion (resistive load) | < 1.5 % |
| Load impact recovery time | 0.4 ms |
| Turn on delay | 20 s to 40 s depending on the number of module installed |
| Nominal current. Protected against reverse current | 6.6 A | 10.9 A |
| Crest factor at nominal power | 2.8 : 1 | 3 : 1 |
| With short circuit management and protection |
| Short circuit clear up capacity | 10 x In for 20 msec - Available while Mains is available at AC
input port With magnitude control and management |
| Short circuit current after clear up capacity | 2.1 In during 15 s and 1.5 In after 15 s |
| IN TRANSFER PERFORMANCE |
| Max. voltage interruption / total transient voltage duration (max) | 0 s / 0 s |
| SIGNALING & SUPERVISION |
| Display | Synoptic LED |
| Alarms output / supervision | Dry contacts on shelf / Standard USB port and MODBUS on T2S,
optional : Candis Display / Candis TCP-IP |
| Remote on / off | on rear terminal of the shelf via T2S |
